Voltage Detectors

High voltage detection equipment (HV detectors) is specially designed for the safe and practical detection of voltages on electrical medium and high voltage systems in the power generation and distribution, rail network, petrochemical and electrical service and maintenance industries. View our full range of Voltage Detectors at www.substation-safety.com.
The V-Watch Voltage Detector provides an additional layer of safety by identifying and alerting the user to the existence of electric fields or energized electrical equipment surrounding high voltage electrical systems. Audible and visual alarms increase in frequency the closer the worker gets to the high voltage source. Typical initial warning distance is about 7 feet (2.13m) from a 4kVAC conductor. Warning distance increases with higher voltages. Read More...

Personal omnidirectional electric field detector. When the user approaches an electric field between 10kV and 66kV and exceeds an approximate distance of 1m for 10 kV and 3m for 66kV, the voltage detector emits a sound to notify the operator that he/she is within a danger area. This sound will continue until the user moves away from the voltage source. Optimized for use in distribution / transformer substations & overhead lines. Operating range: 10 kV to 66 kV. Operating frequency: 50 and 60Hz. Read More...

Sofamel PEKE-5/36 Compact Electronic High Voltage Detector comes with a telescopic operating pole. Voltage presence is indicated by three red flashing LEDS. Rated voltage: 5 to 36 kV. Frequency: 50 Hz / 60 Hz. Total extended length with to voltage detector is 82 cm. Total length closed 34 cm. Read More...

Sofamel VBD-3/36 Bipolar Voltage Detector is a two pole voltage detector suitable for use in Medium Voltage networks. Voltage range: from 1Kv to 36 Kv AC/DC. Automatic start-up using detection of voltage. Automatic disconnection after two minutes without detection, staying in stand-by situation. Read More...

The 45° angled Antenna are designed to work with VBD-3 type Bipolar Voltage Detectors. It is excellent for use in hard to reach spots. Read More...

The Verifying Unit is used to ensure the correct operation of the Voltage Detector. The unit is connected to the antenna (via two crocodile clips) and produces voltage, it allows to check for correct readings on the Voltage detector. Can be used in conjunction with both the VTBR-3/36 and VBD-3/36 Bipolar Voltage Detectors. Read More...

Sofamel IEC High Tech, High Voltage Detector – Optical & Acoustic

SKU: VT-225/420U, VT-45/420U, VT-66/220U, VT-63/150-U, VT-90/225-U, VT-150/420-U
Electronic voltage detector by micro controller and direct contact detection. Work temperature range: from -25°C to +55°C. Self-ignition when voltage presence. Connection to the pole by Universal head. According to IEC 61243-1 Ed2 and UNE-EN 61243-1/2006+A1.2011 standards. Read More...

Sofamel High Resolution Voltage Detector Medium Voltage – Optical & Acoustic

SKU: VT-22/66U, VT-15/45U, VT-4/12-U, VT-3/10U, VT-10/30U, VT-11/33U
Electronic voltage detector with integrated micro controller and direct contact detection. This voltage detector includes a self-checking system for its complete circuit by the press of a test button. Work temperature range: from -25°C to +55°C. Self-ignition when voltage presence detected. According to IEC 61243-1 Ed2 and UNE-EN 61243-1/2006+A1.2011 standards. Read More...

Electronic voltage detector with integrated micro controller and direct contact detection. Includes advanced technology acquisition that guarantees a perfect and safe indication even within conflicting electric field environments. The detection of voltage presence is indicated by a high luminosity red LED and high acoustic pressure buzzer. Manufactured according to IEC 61243 Standard (except voltage range). Read More...

Using the Sofamel Analogic Voltage Detector with Pole, Medium Voltage - Optical, voltage presence is indicated by LED lights. The voltage detectors includes a self-checking system by way of an integrated piezoelectric generator. Suitable for indoor use by insulating pole according to the rated voltage of the detector. Read More...

Using the Sofamel Analogic Voltage Detector Medium Voltage - Optical, voltage presence is indicated by LED lights. This voltage detector includes a self-checking system by way of an integrated piezoelectric generator. Suitable for indoor use by insulating pole (according to the rated voltage of the detector). Connection to the pole by Universal head. Read More...

Electronic voltage detector with integrated micro controller and direct contact detection. Guarantees a safe indication even within conflicting electric field environments. Work temperature range: from -25°C to +55°C. Self-ignition when voltage presence. Indoor and outdoor use by appropriate insulating pole to the detector voltage range. Connection to the pole by Universal head. Manufactured according to IEC 61243 Standard (except voltage range). Read More...

Sofamel VT-OA DC Railway Voltage Detector has a voltage range of DC voltage 500 V to 5.000 V and operating temperature of -25°C to 55°C. Includes a full self-checking system with automatic disconnection after two minutes without detection. Humidity Range: 20 to 96 %. Indication of alert status: High luminosity green LED. Read More...

The Sofamel VT-OAD DC Voltage Detector includes AC Induced Voltage Indication, a voltage range of DC voltage 500 V to 5.000 V and operating temperature of -25°C to 55°C. Features a full self-checking system with automatic disconnection after two minutes without detection. Humidity Range: 20 to 96 %. Indication of alert status: High luminosity green LED. Read More...

Sofamel VTBR-3/36 Bipolar Voltage Detector is a two-pole detector with high impedance probes for Medium Voltage networks. It includes optical signalling of voltage presence and is suitable for indoor use. Range of use voltage: From 3 to 36 kV AC. Manufactured according with IEC 61481 standard. Read More...

Seaward KD1E High Voltage Indicator

SKU: KD1E/15D, KD1E/KAD, KD1E/19S, KD1E/33, KD1E/22, KD1E/19, KD1E
Portable, neon and digital potential indicators for confirming voltage on earthed neutral systems These instruments let you confirm the presence of voltage on earthed neutral electrical systems. They conform in design lengths to the recommended ... Read More...

The Seaward KD1E High Voltage Indicator is a neon HV potential indicator suitable for use on earthed neutral systems up to 11kV. The Seaward KD1E High Voltage Indicator is a robust and portable ... Read More...

The Seaward KD1E/19 High Voltage Indicator is a neon HV potential indicator suitable for use on earthed neutral systems up to 11kV. The Seaward KD1E/19 High Voltage Indicator is a robust and portable ... Read More...

The Seaward KD1E/22 High Voltage Indicator is a neon HV potential indicator suitable for use on earthed neutral systems up to 11kV. The Seaward KD1E/22 High Voltage Indicator is a robust and portable ... Read More...

The Seaward KD1E/33 High Voltage Indicator is a neon HV potential indicator suitable for use on earthed neutral systems up to 11kV. The Seaward KD1E/33 High Voltage Indicator is a robust and portable ... Read More...

The Seaward KD1E/19S High Voltage Indicator is a neon HV potential indicator suitable for use on earthed neutral systems up to 11kV. The Seaward KD1E/19S High Voltage Indicator is a robust ... Read More...

The Seaward KD1E/KAD High Voltage Indicator is a neon HV potential indicator suitable for use on earthed neutral systems up to 11kV. The Seaward KD1E/KAD High Voltage Indicator is a robust ... Read More...

The Seaward KD1E/15D High Voltage Detector is a digital HV potential indicator, used to indicate the presence of voltage or make voltage measurements on earthed neutral systems up to 15kV. The Seaward KD1... Read More...

The CATU High Voltage Detector 220/400KV (C-Type) is designed to give users maximum safety. The CATU High Voltage Detector 220/400KV (C-Type) features DETEX detectors of the CC-245 series. CATU High Voltage Detector Features Double signalling ... Read More...

The CATU High Voltage Detector 38/110kV (Hex Fitting) is designed to give users maximum safety. The CATU High Voltage Detector 38/110kV (Hex Fitting) features DETEX detectors of the CC-245 series. CATU High Voltage Detector Features ... Read More...

CATU I.E.Compact HV Detector 10-38KV features 10-40KV Voltage Detector ESB approved Requires CE421K stick Not exactly what you are looking for? Contact us with your exact requirements, we’re happy ... Read More...

CATU I.E.Compact HV Detector 10-38KV features: 10-40KV Voltage Detector ESB approved Requires CE421K stick Not exactly what you are looking for? Contact us at sales@powerpoint.ie with your exact ... Read More...

... Read More...

The CATU CL-3-36/1 Two-pole Phase Comparator detects differences in voltage between any two points of an installation indicated by LEDs. The CATU Two-pole Phase Comparator also enables the assessment of the order of magnitude ... Read More...