Sineax Power Transducers

View our full range of Measuring Transducers on our dedicated website, www.powermeters.ie.
The SINEAX G536 is used for the measurement of phase angle or power factor in single-phase or 3-phase electrical systems with symmetrical load. Features include measurement input for sinusoidal, square-wave or distorted nominal input voltage with dominant fundamental wave. Read More...

The SINEAX P530 can be used for the conversion of active power in single phase alternating current or 3-phase systems with balanced or unbalanced load. A load-independent direct current or direct voltage is used as an output signal, which is proportional to the measured active power value. Read More...

The SINEAX Q531 is a measuring transducer for reactive power. It can be used for the conversion of reactive power in single phase alternating current or 3-phase systems with balanced or unbalanced load. A load-independent direct current or direct voltage is used as an output signal, which is proportional to the measured reactive power value. Read More...

The Gossen Metrawatt EMMOD201 is an expansion module for SINEAX A210, SINEAX A220 and SINEAX A230 and enables programming and communication via RS 232 / 485 interface (switchable). The Gossen Metrawatt EMMOD201 features Modbus, Data Storage, RS 232 / 485 Interface ... Read More...

The SINEAX A210 is used for the measurement and display of all values of a 3-phase current system. This convenient device boasts 63 measurands with high accuracy (U, I: 0,5%), 2 pulse or trip point outputs (S0), Minimal installation depth of 46 mm and is transformer ratio programmable. Read More...

The SINEAX A220 is used for the measurement and display of all values of a 3-phase current system. It includes 63 measurands with high accuracy (U, I: 0,5%), 2 pulse or trip point outputs (S0), 5 programmable intervals for active, reactive and apparent power (avg. values) and 8 energy counters for active and reactive energy. Read More...

The SINEAX A230 comes complete with with System Analysis and is used for the measurement and display of all values of a 3-phase current system. This device also provides functions for system and load analysis by measurement of THD, harmonics, asymmetry, comprehensive average and max/min values. Read More...