Measuring Transducers

We supply the full range of Gossen Metrawatt Sineax Measuring Transducers, Multifunction Meters & display units. We are authorised distributors for Gossen Metrawatt in Ireland. View our full range of Measuring Transducers at www.powermeters.ie.
The SINEAX A230 comes complete with with System Analysis and is used for the measurement and display of all values of a 3-phase current system. This device also provides functions for system and load analysis by measurement of THD, harmonics, asymmetry, comprehensive average and max/min values. Read More...

The SINEAX A220 is used for the measurement and display of all values of a 3-phase current system. It includes 63 measurands with high accuracy (U, I: 0,5%), 2 pulse or trip point outputs (S0), 5 programmable intervals for active, reactive and apparent power (avg. values) and 8 energy counters for active and reactive energy. Read More...

The SINEAX A210 is used for the measurement and display of all values of a 3-phase current system. This convenient device boasts 63 measurands with high accuracy (U, I: 0,5%), 2 pulse or trip point outputs (S0), Minimal installation depth of 46 mm and is transformer ratio programmable. Read More...

The Gossen Metrawatt EMMOD201 is an expansion module for SINEAX A210, SINEAX A220 and SINEAX A230 and enables programming and communication via RS 232 / 485 interface (switchable). The Gossen Metrawatt EMMOD201 features Modbus, Data Storage, RS 232 / 485 Interface ... Read More...

The SINEAX Q531 is a measuring transducer for reactive power. It can be used for the conversion of reactive power in single phase alternating current or 3-phase systems with balanced or unbalanced load. A load-independent direct current or direct voltage is used as an output signal, which is proportional to the measured reactive power value. Read More...

The SINEAX P530 can be used for the conversion of active power in single phase alternating current or 3-phase systems with balanced or unbalanced load. A load-independent direct current or direct voltage is used as an output signal, which is proportional to the measured active power value. Read More...

The SINEAX G536 is used for the measurement of phase angle or power factor in single-phase or 3-phase electrical systems with symmetrical load. Features include measurement input for sinusoidal, square-wave or distorted nominal input voltage with dominant fundamental wave. Read More...

The SINEAX i552 Single Phase Measuring Transducers is an AC current transducer that enables the operator to take accurate value measurements for the transformation of sinusoidal or distorted alternating current, with power supply terminal. Read More...

The SINEAX F534 can be used for the conversion of frequency into a direct current or voltage signal, which is proportional to the measured value. Measurement input for sinusoidal, square-wave or distorted nominal input voltage with dominant fundamental wave. Input voltage: 10 to 690 V. Measuring range limits 10 Hz to 1.5 kHz. Read More...

A multifucntional display unit for use with the SINEAX DME4 multi-transducers. The SINEAX A200 displays all measurands and meter contents of any DME4. The display unit is connected to the transducer via a simple RS232 interface cable. Displays all DME4 measurands locally, also for pure bus devices. Read More...

A programmable multi-functional transducer with 4 programmable energy meters for Ah, kVAh, kWh and kvarh and 4 analog outputs, RS232, RS485-MODBUS. The MODBUS interface allows for querying up to 47 measured quantities. Current to 10 A, voltage to 830 V. Read More...

A programmable multi-function transducer with 4 programmable energy meters for Ah, kVAh, kWh and kvarh, RS232 and PROFIBUS. This convenient device can be used for querying up to 47 measured quantities in heavy current systems. Current to 10 A, voltage to 830 V. Read More...

A programmable multi-function transducer with 4 programmable energy meters for Ah, kVAh, kWh and kvarh and enables data transfer via MODBUS interface. This convenient device can be used for querying up to 47 measured quantities in heavy current systems. Current to 10 A, voltage to 830 V. Read More...

3-Phase programmable multi-function transducer with 4 energy meters, RS232, LON. Thios useful device can be used for querying up to 47 measured quantities in heavy current systems. Features include current to 10 A, voltage to 830 V, 4 programmable energy meters for Ah, kVAh, kWh and kvarh and AC-DC power pack with large tolerance range, or AC only. Read More...

A programmable multifunction transducer can be used for simultaneously acquiring several quantities in heavy current systems and comes equipped with 2 energy meters, 4 analog and 2 digital out with RS232. The digital outputs are suitable for limit value monitoring or energy metering. Read More...

A programmable multi-transducer for simultaneously acquiring several quantities in heavy current systems. Features include 2 analog and 4 digital outputs, 4 programmable energy meters for Ah, kVAh, kWh and kvarh and Current to 10 A, voltage to 830 V. Read More...

A programmable multi-funtion transducer with 3 analog outputs and RS232. This useful device includes rated current 1 to 6 A programmable, rated voltage 57 to 400 V (phase-to-neutral) or 100 to 693 V (phase to phase) programmable, universal analogue outputs (programmable). Software with password protection for programming, power system status simulation, data analysis, acquisition of meter data and making settings is also included. Read More...

The Paladin Advantage Universal Programmable Transducer provides measurement, isolation and conversion of all main electrical parameters into an industry standard DC output signal. This useful device can be used in single and three-phase balanced or unbalanced three or four-wire electrical systems. Read More...

Measuring transducer for the transformation of sinusoidal or distorted alternating voltage. Measurement method: logarithmic process. Measurement input: alternating voltage, sinusoidal or distorted, true RMS value measurement. Nominal input voltage: 0...20 to 0...690 V Read More...