Cable Testing & Fault Location

Cable Test Equipment is used to prevent damage to networks and systems and locates faults as precisely and quickly as possible. See our extensive range of VLF test equipment, time domain reflectometers (TDR), cable testing & diagnostics, cable identification and cable fault location equipment from BAUR, Megger & EA Technology.
The FC5300 is an identifier voltage cable that offers all the information that is needed to distinguish a live LV cable among other cables without risk of error. It involves the identification of cables in ... Read More...

FC3000 Phase controller and departures BT is designed to be handled by a single operator for mapping customer phase and feeder connection in just 5 seconds. The device balance the loads on the phases of the ... Read More...

New CAT IV 600 V Time Domain Reflectometer - Perfect for your Distributor Network Operators The New Megger TDR2050 Advanced Dual Channel Time Domain Reflectometer is the first instrument in its class to incorporate a built-in 600 ... Read More...

The Megger TDR500/3 is a hand-held, compact Time Domain Reflectometer (TDR) used to detect faults on metallic cables. It has a minimum resolution of 0.1 m/0.3 ft and a 5 km/15 kft maximum range, this is dependent ... Read More...

The TDR1000/3 is a compact, hand held Time Domain Reflectometer (TDR). The TDR1000/3 has been specifically designed for locating faults on metallic cables. It has a minimum resolution of 0.1 m/0.3 ft and a 5 km/15 kft ... Read More...

The Megger TDR2000/3 is a top quality, dual channel, high resolution Time Domain Reflectometer. It comes equipped with a colour screen for locating faults on paired metallic cables. The TDR2000/3 has a minimum resolution of 0.1... Read More...

The VLF sine wave 45 kV with integrated tanDelta is a compact, strong, portable high-performance test and diagnostic system, it is suited for medium voltage cables. The 45 kV tester is a multifunctional tool suitable for VLF ... Read More...

The Surgeflex is a mobile and battery powered fault locating system that has been designed for stand-alone operation. It will provide it’s full surge energy for up to 1.5 hours nonstop. With 15 kV or 25 kV ... Read More...

Seba KMT’s HVB10 is an extremely precise high-voltage bridge designed to locate cable and sheath faults, perform sheath testing and also pinpoint sheath faults. It is also suited for long HV cables. With its ... Read More...

Seba KMT Test Unit 40 kV T 99/1

SKU: Test Unit 40 kV T 99/1
The T 99/1 High Voltage Test Unit is Ideal for field application and is suitable for insulation testing of cables, cable fittings, equipment and installations. It is a powerful portable device capable of generating a DC ... Read More...

The Seba KMT Teleflex SX has been specifically adapted to the fast events during fault location in power cables. The new hardware with improved parameters as sampling frequency, pulse width and impulse amplitude guarantees larger ... Read More...

Test with 3 Uo for 36 kV cables specially suited for long cables and offshore installations.  The powerful 0.1 Hz VLF test system with energy recovery for testing of cables with Cosine Rectangular Wave voltage according to VDE, ... Read More...

The VLF sine wave 34 kV is a compact, strong, portable VLF sine wave test system for medium voltage cables. The design has been improved for rapid transportation and fast setup and the continuous duty cycle ... Read More...

Seba KMT AC Voltage Test Set T 22/1

SKU: AC Voltage Test Set T 22/1
The AC Voltage Test Set T 22/1 is a portable test set consisting of two separate units. The first is the control unit and the second is the high-voltage unit. This division allows the user to ... Read More...

The SMART THUMP ST16 Portable Cable Fault Locating System provides safe, efficient and easy-to-use solutions for identifying, prelocating and pinpointing many types of cable faults for power cables. The system was developed to meet the ... Read More...

The Seba KMT NIM 1000 Impedance Meter allows for reliable and safe measurement of the low voltage system impedance. The Net Impedance Meter NIM 1000 is used for impedance measurements of LV distribution networks. At the connection ... Read More...

The Seba KMT Surgeflex 32 is a portable cable test and fault location system up to 32 kV for medium and low voltage power cables. The Surgeflex 32 allows for the safe and fast location of faults with ... Read More...

The Seba KMT MFM 10 is a sheath fault location system with bi-polar measuring voltage method. It is easy to use, precise and very fast. The intuitive Seba KMT MFM 10 with fully automatic measurement and evaluation ... Read More...

The Seba KMT HV Test Set 50/80/110 kV is a Portable HV test set for DC voltage testing of cables and cable installations.  The Set consists of an operation unit and an HV Unit. It is ... Read More...

The Seba KMT HV Tester 25 kV is a high voltage generator with a variable negative DC output voltage of 0 … 25 kV. The HV Tester is suitable for DC and insulation testing of cables, joints, electrical fixtures, ... Read More...

The EZ-Thump from Seba KMT is a fast and convenient solution for immediate on-site fault location in one compact fault location device. The Seba KMT EZ-Thump is a compact, lightweight fault location system for LV ... Read More...

SebaKMT HPA 100 AC / HPA 130 DC

SKU: HPA 100 AC / HPA 130 DC
Powerful High-Voltage test system up to 100 kVrms AC 50 Hz The AC Test Set HPA 100 is a very powerful test set which has been designed for installation in cable test van. It can be used for ... Read More...

The SebaKMT GEOLUX GL 660-1 has been designed for the location of earth faults in IT networks such as railway installations, hospitals, power plants or other industrial facilities. It includes capabilities for locating earth faults ... Read More...

SebaKMT Easyloc is both an economical and technical solution to utility locating. It combines a rugged housing, automatic digital display and high quality features which result in greater productivity at reduced operational costs. As a ... Read More...

Clear identification of a cable before it is cut or fitted is of huge relevance to safety. Mistakes can result in fatalities and may also cause outages for the connected customers. The SebaKMT Cable Identifier ... Read More...

Pinpointing is the precise location of faults in the cable sheath. These faults cause the measuring current to flow into the ground. When it exits the cable at the fault point, the measuring current builds ... Read More...

SebaKMT digiPHONE+

SKU: digiPHONE+
digiPHONE+ is a surge wave receiver for acoustic and electromagnetic cable fault pinpointing. It uses a combination of different technologies for efficient noise suppression and provides you with a flawless acoustic performance, which passes only ... Read More...

SebaKMT Easytest 20 kV is reliable and easy after repair and commissioning testing. The SebaKMT Easytest 20 kV allows quick and reliable testing after installing or repairing cable systems. Reconnecting the voltage with without doing any testing ... Read More...

Advanced buried service location technology The New EZiCAT i500 represents the latest design in cable location technology. With state‐of‐the art digital signal processing (DSP) and intelligent software, the EZiCAT i‐Series locators make ... Read More...

Advanced buried service location technology The new EZiCAT i600 provides a unique data capture and on board memory function, allowing verification of the locators use and the ability to recall records following a near miss, ... Read More...

Intelligent GPS, Data Logging Cable locators Every year site workers are injured due to inadvertently striking buried utilities such as electricity cables or gas pipelines. A safe system of work prescribes the use of a ... Read More...

The EZiCAT i500xf-Series range has been specifically designed with long distance tracing in mind. The ability to trace low transmitter frequencies provides a greater tracing range as well as the ability to locate camera ... Read More...

Cable Detection's EZiCAT xf-Series locators provide operators with additional 512Hz and 640Hz tracing modes, enabling operators to trace buried utilities over greater distances or to easily detect sewer - camera inspection systems. Additional features include ... Read More...

Allows you to upload stored records from individual locators, simply upload all records or search by date. Upload information includes: Time and Date InformationIdentifies when and at what time ground surveys were conducted. Usage DurationDetermines ... Read More...

The NEW EZiTEX t100 delivers significantly higher power output than previous transmitters on the market. Dual Frequency Signal Generator. Designed in conjunction with the EZiCAT locators, to easily and accurately trace the route of, or ... Read More...

The EZiTEX xf Signal Transmitters are the latest in cable location design, delivering a higher power output than previous models with the addition of extra low tracing frequencies. This will allow users to: Trace services ... Read More...

The Sonde is a compact dual frequency signal transmitter used to trace drains, sewers and other non conductive services. It can be attached to a range of equipment including drain rods, boring tools and inspection ... Read More...

The Property Connection Set (PCS) is plugged into a live electricity mains cable within the property, (preferably as close to the consumer unit as possible) and the other connector plugged into the EZiTRACE. The EZiTRACE ... Read More...

Where it is not possible or unsafe to make a direct connection to the core of a target cable, (such as live power or telecom cables) the signal clamp may be clipped around the outer ... Read More...

The EZiROD is a length of coiled fibre-glass rod which enables the complete length of a non – metallic drain, duct or pipe to be traced when used in conjunction with the EZiTRACE and EZiCAT. The ... Read More...

Comprehensive Dual Channel capability with dual aspect display. AUTO set up mode for instant use. Ultra fast pulse for near end fault identification. Xpert guidance to potential fault. IP54 rating offers real life working. Designed ... Read More...

IUP Fault Wizard 10KV Thumper

SKU: FAULT WIZARD
The IUP Fault Wizard 10KV Thumper is a light-weight battery operated 10KV cable fault locator. The IUP Fault Wizard 10KV Thumper features variable impulse voltage, which allows low-voltage pulsing and minimum damage to cables. The ... Read More...

The Megger BGFT Battery Ground Fault Locator identifies, tracks and locates ground faults in ungrounded dc battery systems on-line. The Megger BGFT Battery Ground Fault Tracer is particularly effective in a high electrical noise environments, ... Read More...

The Megger L1070 Portable Locator used to locate buried cable and pipe in various situations.  The Megger L1070 Portable Locator is capable of locating overlong or short ranges, inductive or conductive, active or passive. Megger ... Read More...

The Megger L1071 Portable Locator used to locate buried cable and pipe in various situations. The Megger L1071 Portable Locator is capable of locating overlong or short ranges, inductive or conductive, active or passive. Whereas ... Read More...

The Megger MPP2000 Pinpoint Fault Locator pinpoints faults in cable networks using acoustic, electromagnetic and time of flight methods. The Megger MPP2000 Pinpoint Fault Locator replaces the Megger MPP1001. The Megger MPP2000 Pinpoint Fault Locator ... Read More...

The Megger PFL22M-1500 Fault Location System is used to perform accurate cable fault location, including dc tester/burner, surge generator, radar coupling and TDR. The Megger PFL22M-1500 replaces the PFL20-1500 Fault Location ... Read More...

The Ridgid SR-20 Cable Locator is a cable locating system that uses omni-directional antennas, guidance arrows and an easy to read mapping display to lead you quickly and accurately to the target line. The Ridgid ... Read More...

The Ridgid ST-305 Signal Generator is a portable, easy to use line transmitter for use with Ridgid SR-20 SeekTech Cable Locator.   Ridgid ST-305 Signal Generator features  Direct connect using attached clips Induction from optional Inductive ... Read More...

The Ridgid ST-510 Signal Generator is a portable, easy to use line transmitter for use with Ridgid SR-20 SeekTech Cable Locator.  Ridgid ST-510 Signal Generator features Direct connect using attached clips Induction from optional Inductive ... Read More...

The Megger MIT1020-2 Insulation Tester is a 10kV insulation tester designed specifically for the testing and maintenance of high voltage electrical equipment. The Megger MIT 1020-2 Insulation Tester also offers various diagnostic tests such ... Read More...

The Megger MIT 510-2 Insulation Tester is a 5kV insulation tester designed specifically for the testing and maintenance of high voltage electrical equipment. The Megger MIT 510-2 Insulation Tester also offers various diagnostic tests such ... Read More...

The Megger MIT 520-2 Insulation Tester is a 5kV insulation tester designed specifically for the testing and maintenance of high voltage electrical equipment. The Megger MIT 520-2 Insulation Tester also offers various diagnostic tests such ... Read More...